rcwl www.vishay.com vishay dale revision: 06-dec-11 1 document number: 20018 for technical questions, contact: ff2cresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 thick film surface mount chip resistors, wraparound, low value (0.1 ? to 0.91 ? ) features ? low resistance values (0.1 ? to 0.91 ? ) ? suitable for current sensing and shunts ? metal glaze on high quality ceramic ? protective overglaze ? solder contacts on ni barrier layer ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition note * pb containing terminations are not rohs compliant, exemptions may apply note ? power rating depends on the max. temperat ure at the solder point, the component pl acement density and the substrate material. ? part marking: reference surface mount resistor marking document number 20020. ? the resistance is measured from the top side. standard electrical specifications global model case size power rating p 70 c w temperature coefficient ppm/c resistance range ? tolerance % e-series rcwl0402 0402 0.063 600 0.22 to 0.43 524 400 0.47 to 0.91 rcwl0603 0603 0.1 400 0.10 to 0.43 524 200 0.47 to 0.91 rcwl0805 0805 0.125 300 0.10 to 0.43 524 200 0.47 to 0.91 rcwl1206 1206 0.25 300 0.10 to 0.43 524 200 0.47 to 0.91 rcwl1210 1210 0.33 200 0.10 to 0.91 5 24 rcwl1218 1218 1.0 200 0.10 to 0.91 5 24 rcwl2010 2010 0.5 200 0.10 to 0.91 5 24 rcwl2512 2512 1.0 200 0.10 to 0.91 5 24 global part number information part number: rcwl0402r470jqea global model value tolerance tcr packaging rcwl0402 rcwl0603 rcwl0805 rcwl1206 rcwl1210 rcwl1218 rcwl2010 rcwl2512 r = decimal r470 = 0.47 ? j = 5.0 % n = 200 ppm/c m = 300 ppm/c q = 400 ppm/c t = 600 ppm/c ea = lead (pb)-free, tape/reel ta = tin/lead, tape/reel wl 0 4 2 r 4 0 rc q 0 je 7 a
rcwl www.vishay.com vishay dale revision: 06-dec-11 2 document number: 20018 for technical questions, contact: ff2cresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 temperature rise derating technical specifications parameter unit rcwl0402 rcwl0603 rcwl0805 rcwl120 6 rcwl1210 rcwl1218 rcwl2010 rcwl2512 operating temp. range c - 55 to + 155 maximum operating voltage v ( p x r ) 1/2 insulation voltage u ins (1 min) v > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 insulation resistance ? > 10 9 weight/1000 pieces (typical) g 0.65 2 5.5 10 16 29.5 25.5 40.5 dimensions model dimensions in millimeters lwht1t2 reflow soldering wave soldering ab l ab l rcwl0402 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.05 0.2 0.1 0.4 0.6 0.5 0.5 0.6 0.5 rcwl0603 1.55 + 0.10 - 0.05 0.85 0.1 0.45 0.05 0.3 0.2 0.3 0.2 0.5 0.9 1.0 0.9 0.9 1.0 rcwl0805 2.0 + 0.20 - 0.10 1.25 0.15 0.45 0.05 0.3 + 0.20 - 0.10 0.3 0.2 0.7 1.3 1.2 0.9 1.3 1.3 rcwl1206 3.2 + 0.10 - 0.20 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 0.9 1.7 2.0 1.1 1.7 2.3 rcwl1210 3.2 0.2 2.5 0.2 0.55 0.05 0.45 0.2 0.4 0.2 0.9 2.5 2.0 1.1 2.5 2.2 rcwl1218 3.2 + 0.10 - 0.20 4.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 1.05 4.9 1.9 1.25 4.8 1.9 rcwl2010 5.0 0.15 2.5 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 2.5 3.9 1.2 2.5 3.9 rcwl2512 6.3 0.2 3.15 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 3.2 5.2 1.2 3.2 5.2 l b a 0402 0603 0805 1206 1210 2010 2512 90 80 70 60 50 40 30 20 10 0 0 0.1 0.2 0.3 0.4 0.5 power in w temperature rise in c 1218 70 120 100 80 60 40 20 0 - 55 175 ambient temperature in c rated power in % - 25 0 25 75 100 125 155 performance test conditions of test test limits thermal shock mil-std-202, method 107, - 55 c to + 125 c, 300 cycles at each extreme (2.0 % + 0.005 ? ) ? r
rcwl www.vishay.com vishay dale revision: 06-dec-11 3 document number: 20018 for technical questions, contact: ff2cresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? embossed carr ier tape per eia-481-1a. short time overload 2 x rate d power; duration according the model (0.5 % + 0.005 ? ) ? r high temperature exposure mil-std-202, method 10 8, 1000 h at t = 125 c, 0 % power (2.0 % + 0.005 ? ) ? r temperature cycling jesd 22, method ja-104, 1000 cy cles (- 55 c to + 125 c) (2.0 % + 0.005 ? ) ? r biased humidity mil-std-202, method 103, 1000 h 85 c/85 % rh, 10 % x ( p x r ) 1/2 (2.0 % + 0.005 ? ) ? r mechanical shock mil -std-202, method 213, condition c, 10 g s, 6 ms (half sine), 3 directions (0.5 % + 0.005 ? ) ? r vibration mil-std-202, method 204, 5 g s, 20 min, 12 cycles, 3 directions, 10 hz to 2000 hz (0.5 % + 0.005 ? ) ? r operational life mil-std-202, me thod 108, 1000 h at t = 125 c at rated power (2.0 % + 0.005 ? ) ? r resistance to solder heat mil-std-202, method 210, + 260 c solder, 10 s to 12 s dwell, 25 mm/s emergence (1.0 % + 0.005 ? ) ? r moisture resistance mil-std-202, method 106, 0 % power, 7a and 7b not required (2.0 % + 0.005 ? ) ? r packaging model reel tape width diameter pitch pieces/reel code rcwl0402 8 mm/punched paper 180 mm/7" 2 mm 10 000 ea rcwl0603 8 mm/punched paper 180 mm/7" 4 mm 5000 ea rcwl0805 8 mm/punched paper 180 mm/7" 4 mm 5000 ea rcwl1206 8 mm/punched paper 180 mm/7" 4 mm 5000 ea rcwl1210 12 mm/punched paper 180 mm/7" 4 mm 5000 ea rcwl1218 12 mm/embossed pl astic 180 mm/7" 4 mm 4000 ea rcwl2010 12 mm/embossed pl astic 180 mm/7" 4 mm 4000 ea rcwl2512 12 mm/embossed pl astic 180 mm/7" 8 mm 2000 ea performance test conditions of test test limits
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
